Related Experiment Video
Updated: Sep 6, 2025

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Research and Statistical Analysis on Impact Resistance of Steel Fiber Expanded Polystyrene Concrete and Expanded
Wenlong Huo1,2, Sherong Zhang1,2
1State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300350, China.
Abstract:
Steel fiber foamed concrete (SFFC) combines the impact resistance of steel fiber concrete (SFC) and the energy absorption characteristics of foamed concrete (FC), and it has brought attention to the impact field. Using the mechanical properties of SFFC expanded polystyrene concrete, we prepared (EPSC) specimens with 10%, 20%, 30%, 40%, 50% by volume of expanded polystyrene (Veps), and steel fiber expanded polystyrene concrete (SFEPSC) specimens by adding 1% steel fiber (SF) based on the EPSC in this study. The relationship between compressive strength, the Veps and apparent density was revealed. The relationship between the first crack and the ultimate failure impact of SFEPSC specimens was obtained by a drop-weight test. The impact resistance of SFEPSC and EPSC and the variation law of Veps were studied by mathematical statistics. The log-normal and the two-parameter Weibull distributions were used to fit the probability distribution of impact resistance of the SFEPSC and EPSC specimens. Finally, both types of specimens' destruction modes and mechanisms were analyzed. The mechanism of the EPS particles and the SFs dissipating impact load energy was analyzed from the energy point of view.
Related Concept Videos
Fiber Reinforced Concrete
Impact Strength of Concrete
Reinforcements in Concrete
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by...

