Optimization of Ultrasonic Welding Process Parameters to Enhance Weld Strength of 3C Power Cases Using a Design of...

Ultrasonic welding (UW) is a joining of plastics through the use of heat generated from high-frequency mechanical motion, which is known as an efficient process in many applications, such as textile, packaging, or automotive. UW of thermoplastics has been widely employed in industry since no polymer degradations are found after UW. However, the trial-and-error approach is frequently used to study optimum UW process parameters for new 3C plastic power cases in current industry, resulting in random efforts, wasted time, or energy consumption. In this study, Taguchi methods are used to study optimum UW process parameters for obtaining high weld strength of a plastic power case. The most important control factor influencing the weld strength is amplitude, followed by weld pressure, hold time, and trigger position. The optimum UW process parameters are amplitude of 43.4 µm, weld pressure of 115 kPa, hold time of 0.4 s, and trigger position of 69.95 mm. Finally, the confirmation experiments are performed to verify the optimum process parameters obtained in this study.