Geotechnical properties of fresh municipal solid wastes with different compositions under leachate exposure

This paper investigates the geotechnical properties of a type of synthetic municipal solid waste (MSW). The tests were conducted on five groups of synthetic MSW compositions, based on the field characterization of fresh MSW samples collected from Mugga Lane landfill site, ACT, Australia. Compaction, hydraulic conductivity, compression, drained and undrained shear properties of the MSWs with water and leachate addition to the field moisture content were studied. The study shows that adding leachate could increase the maximum dry density of the MSWs under given moisture contents and compaction energies. The hydraulic conductivity of the MSWs could decrease by 100-fold when the confining pressure increases from 15 kPa to 240 kPa. The shear behaviours of the MSW samples follow the strain hardening behaviours of loose sand. The cohesion of the MSWs decreases but the friction angle of the MSWs increases with leachate addition due to the change in the surface tension and viscosity of the pore liquids and the loss of cementitious components. The addition of leachate increases the compression ratios of the MSWs by around 10% to 30% due to the change in the pH of the pore liquids. The most significant components affecting the shear and compression behaviours of the MSW were paper and wood. The effects of leachate exposure on the geotechnical properties of the MSWs is not very significant. It is important to consider the variation of MSW properties to the leachate properties (viscosity, pH and surface tension) in the large body of MSWs in the landfills.