Related Experiment Video
Updated: Sep 6, 2025

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
A novel prescribed performance controller for strict-feedback nonlinear systems with input constraints
Nan-Nan Zhao1, Ai-Min Zhang2, Xin-Yu Ouyang1
1School of Electronic and Information Engineering, University of Science and Technology Liaoning, Anshan, Liaoning, 114051, PR China.
Abstract:
This paper is devoted to the prescribed performance control (PPC) for a class of strict-feedback nonlinear systems with input saturation constraints. With the help of an improved tuning function, the system can achieve the desired steady-state and transient performance in the pre-designed time. A new error transformation function is introduced, which has inherent robustness, so it does not need to use any approximation technique or calculate the analytical derivative. Compared with the relevant results, the proposed scheme has the same lower complexity, but better transient and steady-state performance, although there exists uncertain nonlinearity and uncertain disturbances in the system. Finally, the correctness of the above algorithm is verified by simulation experiments.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
PI Controller: Design
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...

