Related Experiment Video
Updated: Sep 6, 2025

Extraction and Detection of Geosmin and 2-Methylisoborneol in Water and Fish using High-Capacity Sorptive Extraction Probes and GC-MS
Published on: July 3, 2025
An automatic on-line sol-gel pyridylethylthiopropyl functionalized silica-based sorbent extraction system coupled to
Natalia Manousi1, Abuzar Kabir2, Kenneth G Furton3
1Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
Abstract:
A novel sol-gel pyridylethylthiopropyl functionalized silica-based sorbent was synthesized and utilized in an on-line column preconcentration system coupled with flame atomic absorption spectrometry for metal determination. The developed platform was used for the determination of Pb(II) and Cu(II) in beer samples, since there are limited automatic methods for routine analysis of alcoholic beverage. For a preconcentration time of 60 s, the calculated enhancement factors were 96 for Cu(II) and 130 for Pb(II). The limits of detection were 0.33 μg L-1 and 1.98 μg L-1 for Cu(II) and Pb(II), respectively. Moreover, the RSDs were less than 2.9% indicating good method precision. The method was successfully employed for the analysis of commercially available beers. The Cu(II) content of the samples was 1.6-21.8 μg L-1 and the Pb(II) content was 7.3-17.6 μg L-1. The developed manifold exhibited operational simplicity and good performance characteristics, indicating its potential utilization for routine analysis in beer industry.
More Related Videos
04:39A Modified QuEChERS-HPLC Method for Detection of Polycyclic Aromatic Hydrocarbons in Zebrafish Embryos Exposed to Fine Particulate Matter
Published on: June 13, 2025
07:26A Simple Method for Automated Solid Phase Extraction of Water Samples for Immunological Analysis of Small Pollutants
Published on: January 1, 2016
Related Concept Videos
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Precipitation and Co-precipitation
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...