Pyrolysis of exhausted hydrochar sorbent for cadmium separation and biochar regeneration

Sorption is considered a cost-effective technique for cadmium (Cd) removal from water, while the exhausted Cd-enriched sorbent should be properly disposed of. In this study, pyrolysis of exhausted hydrochar sorbent was conducted at 300-900 °C, and the behavior of Cd and the physicochemical properties and environmental applications of the regenerated biochar were investigated. The vaporization of adsorbed Cd in hydrochar was greatly enhanced by elevating pyrolysis temperature, and almost no Cd was observed in the regenerated biochars obtained at 700-900 °C. In comparison with the raw hydrochar, the regenerated biochars showed higher pH, ash content, and carbon content, while the contents of hydrogen and oxygen decreased. According to the toxicity characteristic leaching procedure result, the toxicity and mobility of Cd in hydrochar were greatly reduced after pyrolysis. Notably, the regenerated biochar showed much higher Cd sorption capacity (26.05-30.24 mg/g) than the raw hydrochar (6.70 mg/g). Surface complexation with oxygen-containing functional groups was the dominant Cd sorption mechanism for hydrochar, and precipitation between Cd²⁺ and carbonates dominated the Cd removal by the regenerated biochars. These results illuminated that pyrolysis can be an effective technique for the harmless disposal of exhausted hydrochar sorbent and the regeneration of valuable biochar.