Study on the damage characteristics of overburden of mining roof in deeply buried coal seam

The study of water-conducting fracture zone development height is key to the scientific prevention and control of water damage in mines. Based on the geological conditions of the Wenjiapo coal mine in Binchang, China, this paper investigates the development of water-conducting fracture zone in overlying bedrock during mining under large buried depth and huge thick aquifer by combining on-site well-location microseismic monitoring and laboratory similar material simulation. To overcome the limitation of the " limited outlook " of water-conducting fracture zone investigation, the spatial development characteristics of roof fissures in coal seam mining were determined by on-site " the underground - ground" combined microseismic monitoring and follow-up monitoring, and the development of overlying rock fracture under the large depth of burial was concluded. The fractures were mainly distributed in the upper part of the protective coal pillar on both sides of the working face, but less in the upper part of the working face, and primarily distributed in the protective coal pillar on the side of the working face and the adjacent mining area. To verify the accuracy of the conclusion, the overlying bedrock movement and deformation characteristics and the development process of the hydraulic fracture zone during coal seam mining were analyzed by simulating similar materials in the laboratory, using the monitored area as a prototype. The results show that the development height of the mining fracture zone obtained from microseismic monitoring is basically consistent with the simulation results of similar materials. The research finding have significant implications for the study of fracture distribution characteristics and the evolution law of mining overburden, and provide a foundation for scientific prevention and control of water damage on the roof.