In Vitro Comparative Evaluation of Bond Strength of CAD/CAM Monolithic Zirconia Copings Influenced by Luting Agents...

The aim of the in vitro study was to comparatively evaluate the bond strength of CAD/CAM monolithic zirconia copings using three luting agents and two different finish lines.

For the evaluation of bond strength, 60 extracted human maxillary first premolars were prepared to receive CAD/CAM monolithic zirconia copings. They were randomly divided into six groups of 10 samples each to receive CAD/CAM monolithic zirconia copings to bond with three different luting agents on two different finish lines. The luting agents used were RelyX U200, RMGIC, and Maxcem Elite with finish lines which were incorporated were 90° shoulder and radial shoulder finish lines. The tensile bond strength for all 60 samples was tested using the universal testing machine.

Between and within the group differences in tensile bond strength were analyzed using one-way ANOVA test of significance with Tukey's post-hoc analysis. The statistical analysis revealed that the CAD/CAM zirconia copings used a combination of 90° shoulder and RelyX U200 as the luting agent (Group II) which offered the maximum bond strength.

Within the constraints of this study, it could be concluded that CAD/CAM monolithic zirconia copings luted with RelyX U200 cement on a 90° shoulder finish line is the preferred method, taking the bond strength into consideration.

The results of this study can be extrapolated into a clinical scenario to help the clinician decide the most apt combination of finish line design and the luting agent to achieve superior bond strengths in CAD/CAM zirconia crowns and fixed dental prosthesis.