Textile Strain Sensor Enhancement by Coating Metal Yarns with Carbon-Filled Silicone

Flexible and stretchable strain sensors are an important development for measuring various movements and forces and are increasingly used in a wide range of smart textiles. For example, strain sensors can be used to measure the movements of arms, legs or individual joints. Thereby, most strain sensors are capable of detecting large movements with a high sensitivity. Very few are able to measure small movements, i.e., strains of less than 5%, with a high sensitivity, which is necessary to carry out important health measurements, such as breathing, bending, heartbeat, and vibrations. This research deals with the development of strain sensors capable of detecting strain of 1% with a high sensitivity. For this purpose, a total of six commercially available metallic yarns were coated with a carbon-containing silicone coating. The process is based on a vertical dip-coating technology with a self-printed 3D coating bath. Afterwards, the finished yarns were interlooped and stretched by 1% while electrical resistance measurements were carried out. It was shown that, although the coating reduced the overall conductivity of the yarns, it also improved their sensitivity to stress. Conclusively, highly sensitive strain sensors, designed specially for small loads, were produced by a simple coating set-up and interlooping structure of the sensory yarns, which could easily be embedded in greater textile structures for wearable electronics.