Constructing A/B-Side Heterogeneous Asynchronous Structure with Ag₂Se Layers and Bushy-like PPy toward...

The enthusiasm for environmental energy harvesting has triggered a boom in research on photo-thermoelectric generators (PTEGs), and the relevant applications are mainly focused on self-energy supply sensors owing to the limitations of their output performances. For this purpose, high-output hierarchical heterogeneous PTEGs were constructed by assembling separately optimized thermoelectric (TE) and photothermal (PT) layers. The pressure and temperature conditions of Ag₂Se films during the pressing process were first explored, and the sample with the optimal performance and least defects was selected as the TE layer. At the same time, different morphologies of polypyrrole (PPy) PT layers were electrochemically synthesized. It is found that the three-dimensional structure of Bushy-PPy could effectively improve the light absorption and thus enhance the PT conversion performance. The final assembled PTEG can produce an output voltage of -9.03 mV and an output power of 3.53 μW under the irradiation of a near-infrared light source of 300 mW cm^-2 without a cooling source, and it can also achieve considerable output power under visible light irradiation of different intensities. Combining its high retentions of electrical conductivity (99%) and output performance (97%) after 1000 bending-tension cycles, it is proven to be a promising next-generation wearable flexible energy harvesting device.