Spinel Cu-Mn-Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 °C

High-temperature concentrating solar power (CSP) system is capable of harvesting and storing solar energy as heat toward cost-effective dispatchable solar electricity. Solar selective coating is a critical component to boost its efficiency by maximizing solar absorptance and minimizing thermal emittance losses. However, maintaining a high solar-thermal conversion efficiency >90% for long-term operation at ≥750 °C remains a significant challenge. Herein, we report spray-coated spinel Cu-Mn-Cr oxide nanoparticle-pigmented solar selective coatings on Inconel tube sections maintaining ≥94% efficiency at 750 °C and ≥92.5% at 800 °C under 1000× solar concentration after 60 simulated day-night thermal cycles in air, each cycle comprising 12 h at 750 °C/800 °C and 12 h cooling to 25 °C. The solar spectral selectivity is intrinsic to the band-to-band and d-d transitions of nonstoichiometric spinel Cu-Mn-Cr oxide nanoparticles. This feature offers a large fabrication tolerance in nanoparticle volume fraction and coating thickness, facilitating low-cost and scalable spray-coated high-efficiency solar selective absorbers for high-temperature CSP systems.