Methods, mechanisms, models and tail gas emissions of convective drying in sludge: A review

In tandem with the population and economic growth worldwide, the scale of wastewater treatment has been increasing each year. Thus, a large amount of sludge is being produced. If the problem of sludge treatment and disposal cannot be effectively solved, it will cause serious environmental pollution. The premise of sludge drying is that sludge is "harmless" and can be "recycled." Currently, the studies on convective drying focus on the direction of thin-layer drying, fluidized bed drying, spray drying and pneumatic drying. This paper systematically reviews the convective drying technology of sludge. First, the effects of air velocity temperature, relative humidity and particle size on the drying effect are precisely described, as well as the four different drying stages in the drying process, including preheating, constant rate drying, first falling rate drying, and second falling rate drying stages. Second, the research progress of different convective drying treatment technologies and the application of eight mathematical models of thin-layer drying in this field are elaborated. The effects of sludge shrinkage formation mechanisms and sludge viscous resistance generation during the drying process are also discussed in detail. The formation mechanism of sludge shrinkage and the effect of sludge viscosity resistance during drying are also elaborated. Finally, the main dry tail gases and restraining methods are elaborated during the drying process. This paper will provide a structured reference for the related research of sludge convective drying in the future.