Related Experiment Video
Updated: Sep 4, 2025

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel
Published on: March 29, 2018
Universal and Stable Slippery Coatings: Chemical Combination Induced Adhesive-Lubricant Cooperation
Dagui Wang1, Yajie Chen1, Yu Huang1
1State Key Laboratory of Biogeology and Environmental Geology, Engineering Research Center of Nano-Geomaterials of Ministry of Education, Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan, 430074, P. R. China.
Abstract:
Liquid lubricant of low affinity makes slippery coatings widely used in lubricating, anti-biofouling, anti-icing, fluid guiding, and drag reduction. Two critical challenges, however, remain in the practical application of slippery coatings consisting of liquid lubricants: (1) universality regardless of roughness and chemical composition of substrates, (2) stability of surface lubricity against evaporation. Herein, a chemical method is reported to create a universal and stable slippery lubricant-adhesive cooperated coating (SLACC) through acid catalyzed dehydration reaction between the phenolic hydroxyl of polydopamine (PDA), with universal (for challenge-1) and strong (for challenge-2) adhesion properties, and liquid-like polydimethylsiloxane (PDMS), with lubricant properties. Through overlying PDMS on PDA, a spatial gradient interpenetration of chemical combined PDA and PDMS leaving lubricant PDMS at the outermost of coating is achieved. This structure contributes to the following performances of SLACC: nearly universality suitable for 100 different abiotic or biotic substrates and stability sustainable for long-term usages, UV radiating, refrigerating, hot air drying, freeze drying, knife scratch and abrasion. This proposed strategy is envisioned anti-fouling from plane to tube and exhibits drag reduction in confined space.
Related Concept Videos
Surface Tension, Capillary Action, and Viscosity
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded by other molecules and are attracted equally in all directions by the cohesive forces within the liquid. However, the molecules on the surface of a liquid are attracted only by about one-half as many molecules. Because of the unbalanced molecular attractions on the surface molecules, liquids contract to form a shape that minimizes the number...
Dry Friction
To illustrate this concept, imagine a wooden crate resting on a rough, non-uniform horizontal surface. When an external force is applied to...
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular...
Cohesion
On a...
Colloids
Frictional Force

