Related Experiment Video
Updated: Sep 4, 2025

Rejection of Fluorescence Background in Resonance and Spontaneous Raman Microspectroscopy
Published on: May 18, 2011
Simultaneous detection for adulterations of maltodextrin, sodium carbonate, and whey in raw milk using Raman
Huaixiang Tian1, Shuang Chen1, Dan Li1
1School of Perfume and Aroma Technology, Shanghai Institute of Technology, Shanghai 201418, P.R. China.
Abstract:
To achieve rapid on-site identification of raw milk adulteration and simultaneously quantify the levels of various adulterants, we combined Raman spectroscopy with chemometrics to detect 3 of the most common adulterants. Raw milk was artificially adulterated with maltodextrin (0.5-15.0%; wt/wt), sodium carbonate (10-100 mg/kg), or whey (1.0-20.0%; wt/wt). Partial least square discriminant analysis (PLS-DA) classification and a partial least square (PLS) regression model were established using Raman spectra of 144 samples, among which 108 samples were used for training and 36 were used for validation. A model with excellent performance was obtained by spectral preprocessing with first derivative, and variable selection optimization with variable importance in the projection. The classification accuracy of the PLS-DA model was 95.83% for maltodextrin, 100% for sodium carbonate, 95.84% for whey, and 92.25% for pure raw milk. The PLS model had a detection limit of 1.46% for maltodextrin, 4.38 mg/kg for sodium carbonate, and 2.64% for whey. These results suggested that Raman spectroscopy combined with PLS-DA and PLS model can rapidly and efficiently detect adulterants of maltodextrin, sodium carbonate, and whey in raw milk.
More Related Videos
09:56Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example
Published on: November 18, 2015
08:13A Filter-based Surface Enhanced Raman Spectroscopic Assay for Rapid Detection of Chemical Contaminants
Published on: February 19, 2016
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...