Related Experiment Video
Updated: Sep 3, 2025

Determining Tribocorrosion Rate and Wear-Corrosion Synergy of Bulk and Thin Film Aluminum Alloys
Published on: September 11, 2018
Corrosion Behavior of Alx(CrFeNi)1-x HEA under Simulated PWR Primary Water
Dongwei Luo1, Zhaoming Yang1, Hengming Yang1
1Key Laboratory of Radiation Physics and Technology of Ministry of Education, Institute of Nuclear Science and Technology, Sichuan University, Chengdu 610064, China.
Abstract:
High-entropy alloys (HEAs) have great potential as accident-tolerant fuel (ATF) cladding. Aluminum-forming duplex (BCC and FCC) stainless-steel (ADSS) is a candidate for ATF cladding, but the multiphase composition is detrimental to its corrosion resistance. In this paper, two single-phase HEAs were prepared by adjusting the content of each element in the ADSS alloy. The two HEAs were designed as Al0.05(CrFeNi)0.95(FCC) and Al0.25(FeCrNi)0.75(BCC). Their corrosion behavior under simulated pressurized water reactor (PWR) primary water was investigated. The corrosion products and corrosion mechanisms of these two HEAs were explored. The results show that the corrosion resistance of HEA alloys containing FCC is better than that of BCC and ADSS alloys. At the same time, the reason why the BCC structure composed of these four elements is not resistant to corrosion is revealed.
Related Concept Videos
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
Corrosion

