Experimental Study on the Time-Dependent Characteristics of MLPS Transparent Soil Strength

The time-dependent characteristics of transparent soil strength, composed of magnesium lithium phyllosilicate, is important for applying a thixotropic clay surrogate. The gas injection method was employed to obtain the strength, represented as cracking pressure, which was then correlated to variables including rest time, disturbance time, and recovery time. Three concentrations (3, 4, and 5%) were tested. The results show that the strength was directly proportional to the rest time, recovery time, and concentration while the disturbance time reversed. The calculated limit strengths for 3%, 4%, and 5% transparent soils were 3.831 kPa, 8.849 kPa, and 12.048 kPa, respectively. Experimental data also showed that the residual strength for higher concentration transparent soil was more significant than the lower ones. The elastic property immediately generated partial strength recovery after disturbance, while the viscosity property resulted in a slow recovery stage similar to the rest stage. The strength recovery rate was also sensitive to concentration. Furthermore, the strength with 3%, 4%, and 5% concentrations could regain limit values after sufficient recovery, which were calculated as 4.303 kPa, 8.255 kPa, and 14.884 kPa, respectively.