Related Experiment Video
Updated: Sep 3, 2025

Experimental System of Solar Adsorption Refrigeration with Concentrated Collector
Published on: October 18, 2017
Combination of Passive and Active Solar Heating with Thermal Energy Storage
Andreas Thangam1, Amar Auckaili1, Mohammed Farid1
1Chemical and Materials Engineering, The University of Auckland, Auckland 1142, New Zealand.
Abstract:
This study investigated the impact of individual and combination of different sources of heating (passive solar heating, electric oil-heater, and solar air heater) in a pilot-scale building containing phase change material (PCM) for a potential reduction in energy consumption while maintaining thermal comfort. Unlike most of the recent simulations and modelling studies, this impact was tested experimentally using two identical control and test huts located at the University of Auckland. The control hut was equipped with standard gypsum boards while the test hut had gypsum boards containing PCM (PureTemp 20, PT20). The study found that combining both active and passive solar heating with a temperature-controlled electric oil heater demonstrated the ability to provide significant energy savings and maintain thermal comfort in the test hut, most notably overnight. The suggested combination was tested over different weather conditions and with different temperature constraints to maintain thermal comfort and achieve energy savings ranging from 33% to 87.5%.
Related Concept Videos
Mechanism of heat transfer
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanisms of Heat Transfer I
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Refrigerators and Heat Pumps
A household refrigerator removes heat from...

