High-Dispersed V₂O₅-CuO_X Nanoparticles on h-BN in NH₃-SCR and NH₃-SCO Performance

Typically, to meet emission regulations, the selective catalytic reduction of NO_X with NH₃ (NH₃-SCR) technology cause NH₃ emissions owing to high NH₃/NO_X ratios to meet emission regulations. In this study, V-Cu/BN-Ti was used to remove residual NO_X and NH₃. Catalysts were evaluated for selective catalytic oxidation of NH₃ (NH₃-SCO) in the NH₃-SCR reaction at 200-300 °C. The addition of vanadium and copper increased the number of Brønsted and Lewis acid sites available for the reaction by increasing the ratio of V⁵⁺ and forming Cu⁺ species, respectively. Furthermore, h-BN was dispersed in the catalyst to improve the content of vanadium and copper species on the surface. NH₃ and NO_X conversion were 98% and 91% at 260 °C, respectively. Consequently, slipped NH₃ (NH₃-Slip) emitted only 2% of the injected ammonia. Under SO₂ conditions, based on the NH₃ oxidation reaction, catalytic deactivation was improved by addition of h-BN. This study suggests that h-BN is a potential catalyst that can help remove residual NO_X and meet NH₃ emission regulations when placed at the bottom of the SCR catalyst layer in coal-fired power plants.