Performance Enhancement of Polymerized, Functionalized Solution Styrene-Butadiene Rubber Composites Using Oligomeric...

Polymerized, functionalized solution styrene-butadiene rubber (F-SSBR) is a new type of polymerized styrene-butadiene rubber solution containing specific terminal groups, which can be used in treads for high performances. However, the wet skid resistance related to safety, the rolling resistance to energy consumption, and the wear resistance to service life are often contradictory and form the performance "magic triangle". In this work, oligomeric resins, including Coumarone resin, C₉ resin, C₅/C₉ resin and a styrene-α-methyl styrene copolymer (SSC), were used as tire functional additives and selected to replace treated distillate aromatic extract (TDAE) to improve the performances of silica-filled F-SSBR composites. The C₉ resin, C₅/C₉ resin and SSC could enhance the modulus at 300% and tensile strength of the F-SSBR composite. The four resins could improve the wet skid resistance and wear resistance of the composites. However, Coumarone resin caused poor silica dispersion in the F-SSBR matrix and eventually, the lower modulus, higher loss factor at 60 °C and the higher heat buildup in the composite were comparative to the composite with TDAE. Furthermore, the synergistic effect of the C₅/C₉ resin and SSC was found to improve the mechanical performance of the composites and it resulted in higher tensile strength and modulus, and a lower heat buildup, compared to the case when only TDAE was used. It is noted that the properties "magic triangle" was broken by the C₅/C₉ resin and SSC, and the C₅/C₉10T15 increased the wet skid resistance by 21.7%, fuel-saving rate by 2.3%, and wear resistance by 8.3%, while S20T5 increased the wet skid resistance by 30.4%, fuel-saving rate by 7%, and wear resistance by 25% compared with CG.