Related Experiment Video
Updated: Sep 3, 2025

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics
Published on: August 28, 2018
Comparison of Sb2O3 and Sb2O3/SiO2 Double Stacked pH Sensing Membrane Applied in Electrolyte-Insulator-Semiconductor
Chyuan-Haur Kao1,2,3,4, Kuan-Lin Chen1, Hui-Ru Wu5
1Department of Electronic Engineering, Chang Gung University, 259 Wen-Hwa 1st Road, Kwei-Shan, Taoyuan 333, Taiwan.
Abstract:
In this study, electrolyte-insulator-semiconductor (EIS) capacitors with Sb2O3/SiO2 double stacked sensing membranes were fabricated with pH sensing capability. The results indicate that Sb2O3/SiO2 double stacked membranes with appropriate annealing had better material quality and sensing performance than Sb2O3 membranes did. To investigate the influence of double stack and annealing, multiple material characterizations and sensing measurements on membranes including of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were conducted. These analyses indicate that double stack could enhance crystallization and grainization, which reinforced the surface sites on the membrane. Therefore, the sensing capability could be enhanced, Sb2O3/SiO2-based with appropriate annealing show promises for future industrial ion sensing devices.
More Related Videos
08:50Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
08:12Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015