Related Experiment Video
Updated: Sep 3, 2025

Optimization, Test and Diagnostics of Miniaturized Hall Thrusters
Published on: February 16, 2019
Modeling study of divertor particle and heat flux asymmetries for EAST H-mode discharges
1Department of Radiotherapy, The First Affiliated Hospital of Hainan Medical University, Hainan Medical University, Haikou, 571199, China. gzdeng001@163.com.
Abstract:
The BOUT++ transport code is run to study the effects of plasma drifts on the divertor out-in asymmetries (DOIAs) of particle and heat fluxes and their decay widths for EAST lower single null H-mode discharges. The diamagnetic drift seems to have no effects on the DOIAs of total particle and heat fluxes due to its divergence-free nature. However, it could significantly increase the DOIAs of peak particle and heat fluxes and the flux decay widths. The E × B drift is found to induce a large plasma flow to the divertor region, enhancing the DOIAs of both total and peak particle and heat fluxes and the flux decay widths. Both the radial and poloidal components of the E × B drift are necessary in increasing the DOIAs, however, the radial E × B drift seems to play a more important role. The effects on the DOIAs caused by both diamagnetic and E × B drifts are reversed with the reverse of toroidal magnetic field. The heat flux decay width λq and spreading width Sq are important physical and engineering parameters for the divertors and could be obtained by fitting the heat flux profiles at divertor targets. The λq at the outer target from the simulation case with all drifts could well match with the multi-machine scaling proposed by Eich and the DOIA of λq is in reasonable agreement with the scaling proposed by Goldston.
Related Concept Videos
Modeling of Diode Forward Characteristics
Modeling of Diode Reverse Characteristics
When a reverse voltage applied to a Zener diode exceeds its breakdown voltage, the diode enters the breakdown region. At this point, the...
Magnetic Force Between Two Parallel Currents
The force exerted by the magnetic field due to the first conductor over a finite length of the second conductor is given as the product of the current in the second conductor and the vector product of the length vector along the current element and the field due to the first conductor. According to the...
Steady, Laminar Flow Between Parallel Plates
Magnetostatic Boundary Conditions
Electrostatic Boundary Conditions in Dielectrics
Consider a case where both the mediums across a boundary are two different dielectric materials. Recall that the electric field and electric displacement are proportional and related through the material's...

