Related Experiment Video
Updated: Sep 3, 2025

Sandy Soil Improvement through Microbially Induced Calcite Precipitation MICP by Immersion
Published on: September 12, 2019
Role of Gypsum Content on the Long-Term Performance of Lime-Stabilised Soil
Mansour Ebailila1,2, John Kinuthia2, Jonathan Oti2
1Department of Civil Engineering, Faculty of Engineering, Bani Waleed University, Bani Waleed, Libya.
Abstract:
The role of gypsum level on the long-term strength and expansion of soil stabilised with different lime contents is not well understood. This research, therefore, studied the effect of varying gypsum concentrations of 0, 3, 6, and 9 wt% (equivalent to the sulfate contents of 0, 1.4, 2.8, and 4.2%, respectively) on the performance of sulfate soil stabilised with two lime levels (4 and 6 wt%). This was carried out to establish the threshold level of gypsum/lime (G/L) at which the increase in G/L ratio does not affect the performance of lime-stabilised sulfate soil. Both unconfined compressive strength (UCS) and expansion, along with the derivative thermogravimetric (DTG) analysis, were adopted to accomplish the present objective. Accordingly, the result indicated that the strength and expansion were proportional to the lime and sulfate content, of which a G/L ratio of 1.5 was the optimum case scenario for UCS, and at the same time, the worst-case scenario for expansion. This discovery is vital, as it is anticipated to serve as a benchmark for future research related to the design of effective binders for suppressing the sulfate-induced expansion in lime-stabilised gypseous soil.
Related Concept Videos
Soundness of Cement
Hydration of Cement
Mortar Properties
Setting Time of Cement
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Fineness of Cement
Direct...

