Related Experiment Video
Updated: Sep 2, 2025

Versatile CO2 Transformations into Complex Products: A One-pot Two-step Strategy
Published on: November 9, 2019
Conditions for the Joint Conversion of CO2 and Syngas in the Direct Synthesis of Light Olefins Using
Ander Portillo1, Ainara Ateka1, Javier Ereña1
1Department of Chemical Engineering, University of the Basque Country UPV/EHU, P.O. Box 644, Bilbao 48080, Spain.
Abstract:
The conditions for promoting the joint conversion of CO2 and syngas in the direct synthesis of light olefins have been studied. In addition, given the relevance for the viability of the process, the stability of the In2O3-ZrO2/SAPO-34 (InZr/S34) catalyst has also been pursued. The CO+CO2 (CO ) hydrogenation experimental runs were conducted in a packed bed isothermal reactor under the following conditions: 375-425 °C; 20-40 bar; space time, 1.25-20 gcatalyst h molC -1; H2/(CO ) ratio in the feed, 1-3; CO2/(CO ) ratio in the feed, 0.5; time on stream (TOS), up to 24 h. Analyzing the reaction indices (CO2 and CO conversions, yield and selectivity of olefins and paraffins, and stability), the following have been established as suitable conditions: 400 °C, 30 bar, 5-10 gcat h molC -1, CO2/CO = 0.5, and H2/CO = 3. Under these conditions, the catalyst is stable (after an initial period of deactivation by coke), and olefin yield and selectivity surpass 4 and 70%, respectively, with light paraffins as byproducts. Produced olefin yields follow propylene > ethylene > butenes. The conditions of the process (low pressure and low H2/CO ratio) may facilitate the integration of sustainable H2 production with PEM electrolyzers and the covalorization of CO2 and syngas obtained from biomass.
Related Concept Videos
Oxidation of Alkenes: Syn Dihydroxylation with Osmium Tetraoxide
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...

