Exposure to asbestos during brake maintenance of automotive vehicles by different methods

Asbestos concentrations were measured during the different operations of brake maintenance of passenger cars, trucks and buses in 24 Finnish workplaces. The estimated average asbestos exposure during the workday (8-hr time-weighted average) was 0.1-0.2 fibers/cm3 during brake repair of trucks or buses, and under 0.05 f/cm3 during repair of passenger car brakes when the background concentration was not included in the calculations. The background concentration was estimated to be less than 0.1 f/cm3. During brake maintenance of buses and trucks, heavy exposure, 0.3-125 (mean 56) f/cm3, was observed during machine grinding of new brake linings if local exhaust was not in use. Other short-term operations during which the concentration exceeded 1 f/cm3 were the cleaning of brakes with a brush, wet cloth or compressed air jet. During brake servicing of passenger cars, the concentration of asbestos exceeded 1 f/cm3 only during compressed air blowing without local exhaust. The different methods of decreasing the exposure and the risk of asbestos-related diseases among car mechanics are discussed.