Enhanced adsorption and recyclability of surface modified hydrophobic silica aerogel with triethoxysilane: removal of...

Amine modified pumice-derived silica aerogel (AMPDSA) was synthesized and grafted up to 6.52 [Formula: see text] with (3-aminopropyl) triethoxysilane for cefixime antibiotic adsorption. Using Response surface methodology, at the pH of 3, the maximum removal of cefixime of 80.42% for an initial concentration of 3.56 mg L^-1 was achieved at an equilibrium time of 150 min. The compliance of various kinetic and isotherm models for the batch sorption system was corroborated from the correlation coefficient (R²) values. The maximum adsorption capacity of 19.76 mg g^-1 and 49.63 mg g^-1 was calculated for Langmuir and Khan isotherm models, respectively. The removal by fixed-bed column as a function of flow rate, initial cefixime concentration, and bed height was also performed. The maximum adsorption capacity of column with the bed height of 15 cm was found to be 31 mg g^-1 at the flow rate of 10 mL min^-1 for the initial concentration of 20 mg L^-1. The compliance of Thomas model with the column sorption was observed. The characterization using SEM, BET, and XRD was carried out for the virgin and regenerated AMPDSAs. The regeneration experiments confirmed the ability of AMPDSA for its cefixime removal efficiency of 80% up to eight cycles.