Related Experiment Video
Updated: Sep 2, 2025

Three Dimensional Vestibular Ocular Reflex Testing Using a Six Degrees of Freedom Motion Platform
Published on: May 23, 2013
Dependence of binaural gain for infrasound on interaural phase difference
Marion U Bug1, Melina Strüp1, Torsten Marquardt2
1Physikalisch-Technische Bundesanstalt, Bundesallee 100, 38116 Braunschweig, Germany.
Abstract:
Increasing complaints about infrasound have generated interest in understanding its perception, including binaural effects. This study investigated the level difference between monaural and binaural presentation required for detection and equal loudness (binaural gain) for pure tones with frequencies of 8, 32, and 400 Hz and an 8 Hz sinusoidally amplitude-modulated tone with diotic 400 Hz carrier. Monaural stimuli were compared to binaural stimuli with interaural phase differences (IPDs) of 0°, 90°, and 180° in two experiments: absolute threshold measurements and loudness matching at 40 phons. The latter was repeated with transposed tones (400 Hz carrier multiplied by a half-wave-rectified 8 Hz sinusoid). When expressed as differences in sound pressure level, similar binaural gain was found across all stimulus types under the diotic condition. Confirming previous studies, the gain was larger at supra-threshold levels (40 phons) than at threshold. However, when the loudness-matching results were expressed as binaural gain with respect to the loudness level, they became 17.5, 11.2, and 5.8 phons for the 8, 32, and 400 Hz stimuli, respectively. Results for the 8 Hz pure tone and the transposed stimulus were IPD dependent.
Related Concept Videos
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Gain
Gain:
Suppose Vin is the input and Vout is the output signal to a circuit.
Bode Plots
A network function represents the ratio of a system's output to its input, with the magnitude and phase angle derived from the complex network function. The decibel logarithmic gain is...
Sound Waves: Interference
Transfer function and Bode Plots-II
Sound Intensity Level
The human ear can perceive an extensive range of sound intensity, necessitating the use of the logarithmic scale to define a physical quantity—the intensity level. It is a ratio of two intensities and...

