Related Experiment Video
Updated: Sep 2, 2025

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Determination of urea, phosphate, and potassium in agricultural runoff waters using electrochemical impedance
Guruprasadh Jagannathan Parasuraman1, Ramakrishnan Vishnuraj2,3, Surjith Kannankuzhiyil2,3
1Amrita Centre for Wireless Networks and Applications, Amrita Vishwa Vidyapeetham, Amritapuri, India.
Abstract:
Large-scale use of chemical fertilizers has resulted in the contamination of agricultural runoff waters by soil macronutrients NPK, whose detection is of significant interest. This work reports the determination of macronutrients in the form of urea (N), orthophosphate PO43- (P), and potassium K+ (K) in simulated agricultural runoff waters. Their solutions were prepared by extracting water-soluble constituents of soil. This 'base' solution contains high concentrations of various species, including Cl-, SO42-, NO3-, PO43-, Na+, K+, and NH4+ along with natural organic matter. Predetermined amounts of urea (4 to 22.5 ppm), PO43- (7 to 50 ppm), and potassium K+ (25 to 250 ppm) were added to the base simulated runoff water to prepare standard stock solutions. Using stainless steel working and counter electrodes, a small AC perturbation (±10 mV vs. OCP, vs. Ag/AgCl) was applied and the frequency response of the working electrode-solution interface was measured from 1 Hz to 1 MHz. The interface itself was modeled as a suitable equivalent electrical circuit, and the magnitudes of its components were fitted from experimental data using nonlinear regression. It is observed that PO43- concentration is a linear function of charge transfer resistance arising from redox reaction, K+ concentration is a quadratic function of double-layer capacitance arising from its higher mobility, and urea concentration can be correlated as a linear function of constant phase element arising from its polarization in the presence of an applied electric field. The sensor exhibits good sensitivity, repeatability, and excellent performance against interfering species. These preliminary results show significant potential for development of a real-time or on-site sensing device.
More Related Videos
08:09Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity
Published on: August 19, 2018
08:41Electrochemical Impedance Spectroscopy as a Tool for Electrochemical Rate Constant Estimation
Published on: October 10, 2018
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Interfacial Electrochemical Methods: Overview
Controlled-Potential Coulometry: Electrolytic Methods
The chosen potential...
Ion-Exchange Chromatography
Electrodeposition
Electrodeposition can...
Electrogravimetric Analysis: Overview
To test the completeness of the...