Related Experiment Video
Updated: Sep 2, 2025

Determination of the Friction Coefficients of Icy Pavements Under Different Amounts of Snowfall
Published on: January 6, 2023
Novel SHRP method showed alternative deicers outperform NaCl brine for certain winter roadway maintenance
Eleanor Huggins Skelton1, Leigh Terry2, Armen Amirkhanian3
1The University of Alabama, SERC 2024B, Tuscaloosa, 35406, Alabama, USA.
Abstract:
Transportation agencies are responsible for balancing public safety and environmental impacts in their winter roadway maintenance operations. In managing the environmental impact of deicing procedures, a minimum effective dose should be used and less harmful deicing substances should be considered based on rigorous standardized tests. The subject research presents a modified laboratory test procedure and test apparatus for implementation in the evaluation and selection of deicing agents and definition of an appropriate and efficient application rate. The proposed test procedure is less cumbersome, produces more readily controlled experimental conditions, and is expected to provide improved reproducibility compared to current test methods. This modified approach is then used to evaluate the efficacy of several liquid deicing agents which could be used as an alternative to conventional NaCl brine. The comparative testing found that alternative deicing agents performed as well or better than NaCl brine, sometimes even at lower application rates. In particular, the addition of biocomponents or glycerol byproducts was shown to improve performance of chloride deicing agents.
Related Concept Videos
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...
Accelerators
The effectiveness of calcium chloride can...
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Design Example: Managing Concrete Workability
Retarders
The function of retarders is to delay the setting of concrete, and this effect can be measured using a penetration test. The retardation process involves adding...
Cold Weather Concreting
To counteract the negative impacts of cold weather, ensuring...

