Tuning the Electronic Structure of Cobalt Selenide on Copper Foam by Introducing a Ni Buffer Layer for Highly...

The development of a cost-effective, remarkably competent, and durable bifunctional electrocatalyst is the foremost requirement of water splitting to generate H₂ fuel as a renewable energy technology. Three-dimensional porous copper foam (Cuf) when electrochemically decorated with transition metal selenide results in a highly active electrocatalyst for adequate water electrolysis. In terms of water splitting, the role of cobalt selenide and Cuf has already proven to be remarkable. The introduction of a Ni buffer layer between Cuf and cobalt selenide (Cuf@Ni-CoSe₂) acts as a valve to enhance the electron thrust from the substrate to the material surface with no compromise in the overall material conductivity, which not only increases the efficiency and activity but also improves the stability of the catalyst. The self-supported synthesized catalyst material showed an admirable activity toward the oxygen evolution reaction and hydrogen evolution reaction in alkaline media. The performance of the catalyst was found to be significantly better than that of the noble catalyst RuO₂. The catalyst was very stable up to 93 h and attained a full cell voltage of only 1.52 V at a current density of 10 mA cm^-2. Therefore, for large-scale hydrogen production, this as-synthesized catalyst hss the potential to replace conventional fossil fuel-based energy systems.