Salmonella contamination and hazard analysis in a storage facility for feed materials in Japan

To reduce Salmonella contamination of animal feeds, Salmonella contamination in a feed materials storage facility was investigated, and hazard analysis was performed to acquire the basic information necessary to establish a control method for Salmonella. The result is that managers of feed materials storage facilities will be able to introduce the Hazard Analysis and Critical Control Point (HACCP) systems to quickly and efficiently.

A total of 472 samples, including deposits, adhesions, environment samples and materials, were investigated. The detection rate in the storage facility was 5.1% (24/472) over the three-year investigation period. The serovars of detected Salmonella were Agona, Anatum, Bron (or Agbeni), Chester, Infantis, Mbandaka, Minnesota, Muenster, Sinstorf, Typhimurium, O18:- and O1,3,19:-. As a result of hazard analysis after confirming the multiplication factors and detection rate, important hazards were judged to be the outdoor equipment and dust collector.

The risk of Salmonella contamination in storage facilities was clarified. Important Salmonella hazards in storage facilities are Salmonella-contaminated feed materials, multiplication factors such as rainwater and dew condensation, and Salmonella-accumulated dust in dust collectors for fine-powder recovery. These results suggest that proper control of these hazards could reduce the risk of Salmonella in storage facilities.

This is the first report describing actual Salmonella contamination conditions and risk assessment using the hazard analysis at a feed materials storage facility in Japan. This study will consider implications for the feed industry because the hazard analysis clarified the sites of Salmonella contamination, the tendency of contamination and the points for implementing control measures in the feed materials storage facility.