A biomechanical evaluation of the Lenox Hill knee brace

This study was conducted to determine the effectiveness of the Lenox Hill knee brace in limiting anterior translation and external rotation of the tibia in reference to the femur in normal and ligament-deficient knees. Four fresh cadaver knees were fitted with Lenox Hill knee braces according to the manufacturer's guidelines. A computer-assisted testing apparatus was constructed that allowed each knee to be tested as a function of knee flexion angle, joint load, and soft tissue integrity. Each knee served as its own control. While 45 kg of anterior force was applied to the tibia of the anterior cruciate ligament deficient knees, the Lenox Hill knee brace was able to decrease anterior translation from an average of 10 mm, to 5.7 mm, at 30 degrees of flexion when no vertical load was present. This limiting effect was lost when the medial collateral ligament was sectioned in addition to the anterior cruciate ligament or when both the medial and the lateral collateral ligaments were sectioned along with the anterior cruciate ligament. When 20 Newton-meters (Nm) of torque was applied to the femurs at 30 degrees of flexion without vertical load, the Lenox Hill knee brace limited external rotation of the tibia in all tested categories. For intact knees at 30 degrees of flexion and no vertical load, the Lenox Hill knee brace decreased external rotation from 18 degrees to 10 degrees. In the anterior cruciate ligament-sectioned knees, external rotation was decreased from an average of 20.2 degrees to 16.1 degrees. In the knees with sectioned anterior cruciate and medial collateral ligaments, the average reduction was from 21.2 degrees to 15.4 degrees.(ABSTRACT TRUNCATED AT 250 WORDS)