Design of Under-Actuated Soft Adhesion Actuators for Climbing Robots

Since climbing robots mainly rely on adhesion actuators to achieve adhesion, robust adhesion actuators have always been the challenge of climbing robot design. A novel under-actuated soft adhesion actuator (USAA) proposed in this paper for climbing robots can generate adhesion through robot's load applied to the actuator. The actuator is composed of a soft film/substrate structure with an annular groove on the substrate and a cavity on the soft film. To fabricate the actuator, we first study the influence of the geometric parameters of the USAA on the maximum adhesion of the actuator by analysis and experiments, and then combine these parameters and the boundary conditions of the static meniscus in the mold to design the mold. Moreover, we fabricate a climbing robot equipped with USAAs and evaluate its performance on horizontal and inclined surfaces with a wide range of characteristics. The USAA can generate strong and controllable adhesion to various smooth and semi-smooth surfaces. Furthermore, the fabricated robot performs well on various surfaces under a certain load (at least 500 g) and speed (369 mm/min) through experiments. It's adaptability to a variety of surfaces enables a wide range of applications and pushes the boundaries of soft adhesion actuators.