Related Experiment Video
Updated: Sep 1, 2025

Biotribological Testing and Analysis of Articular Cartilage Sliding against Metal for Implants
Published on: May 14, 2020
Tribochemical synergy between phosphate-intercalated layered double hydroxide additives and super high oleic
Tuong Ly Kiet Dao1, Kiet Anh Tieu1, Bach Hoang Tran1
1School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Northfield Avenue, Wollongong, NSW, 2522, Australia. ktieu@uow.edu.au.
Abstract:
In this study, the tribological properties of a series of layered double hydroxides (LDHs) intercalated by various phosphate anions (hydrogen phosphate, orthophosphate, pyrophosphate, and hexametaphosphate) were investigated by ball-on-disc testing in safflower oil which has a super high content of oleic acid (OA). The Mg-Al-NO3- LDH precursor was first synthesized by a coprecipitation method, and then nitrate anions were substituted by different phosphate anions via anion exchange. The successful intercalations were confirmed by X-ray powder diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) analysis. The tribological results indicate that the antiwear properties increased linearly with the basic strength of the phosphate anions. Stronger bases, such as orthophosphate (PO43-) and pyrophosphate (P2O74-), encourage the dissociation of OA to form a protective oleate tribofilm on steel surfaces, leading to more than 40% wear reduction compared to the base oil. The tribological performance of the best antiwear candidate, PO43--LDH, was studied further under different loads and concentrations. A comparison between PO43--LDH and other nanomaterials was also carried out with PO43--LDH exhibiting a comparable performance against hexagonal boron nitride (BN).
Related Concept Videos
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular...
Colloids

