Optimization of tetracycline removal from water by iron-coated pine-bark biochar

We synthesized iron-coated pine-bark biochar (Fe-PBB) and determined the optimal conditions for removing the antibiotic tetracycline from water. The Fe-PBB was synthesized by depositing iron oxide on pyrolyzed pine-bark waste via a facile co-precipitation method. Characterization (SEM, EDX, and TGA) showed successful deposition of a mass of approximately 27% (w/w) iron on the PBB to synthesize Fe-PBB. Fe-PBB exhibited five times higher adsorption capacity (~ 10 mg/g) for tetracycline compared with PBB. The effects of initial tetracycline concentration, pH, temperature, and Fe-PBB dose on the adsorption removal of tetracycline from water were systematically investigated and optimized using a statistical experimental design and response surface methodology. The empirical relationship between the experimental factors and tetracycline removal was modeled, statistically validated through the analysis of variance, and used to predict the optimal conditions for adsorption removal of tetracycline. We found that ≥ 95% of the tetracycline can be removed at a tetracycline concentration of 1 mg/L, pH of 7, temperature of 50 °C, and a Fe-PBB dose of 2 g/L. The adsorption isotherm modeling study suggests that the adsorption of tetracycline can be attributed to the pore filling phenomenon and multilayer adsorption on the Fe-PBB. A thermodynamics study showed that the adsorption occurs spontaneously with an endothermic reaction.