Trichloramine and Hydroxyl Radical Contributions to Dichloroacetonitrile Formation Following Breakpoint Chlorination

Breakpoint chlorination is applied to remove ammonia in water treatment. Trichloramine (NCl₃) and transient reactive species can be present, but how they affect the formation of nitrogenous disinfection byproducts is unknown. In this study, the dichloroacetonitrile (DCAN) formation mechanisms and pathways involved during breakpoint chlorination (i.e., free chlorine to ammonia molar ratio ≥2.0) were investigated. DCAN formation during breakpoint chlorination of natural organic matter (NOM) isolates was 14.3-20.3 μg/L, which was 2-10 times that in chlorination without ammonia at similar free chlorine residual conditions (2.1-2.9 mg/L as Cl₂). The probe tests and electron paramagnetic resonance spectra supported the presence of ^•OH, ^•NO, and NCl₃ besides free chlorine in breakpoint chlorination. ¹⁵N-labeled ammonium-N tests indicated the incorporation of ammonium-N in DCAN formation though ammonia was eliminated during breakpoint chlorination. Aromatic non-nitrogenous moieties, such as phenols (i.e., none DCAN precursors in the free-chlorine-only system), became DCAN precursors during breakpoint chlorination. The reactions involved in reactive nitrogen species, such as ^•NO/^•NO₂ and NCl₃, led to additional nitrogen sources in DCAN formation, accounting for 36-84% of total nitrogen sources in DCAN formation from NOM isolates and real water samples. Scavenging ^•OH by tert-butanol reduced DCAN formation by 40-56%, indicating an important role of ^•OH in transforming DCAN precursors. This study improves the understanding of breakpoint chlorination chemistry.