Related Experiment Video
Updated: Aug 31, 2025

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Polyethylene glycol functionalized reduced graphene oxide coupled with zinc oxide composite adsorbent for removal of
Dibya Ranjan Rout1, Hara Mohan Jena1
1Department of Chemical Engineering, National Institute of Technology, Rourkela, 769008, Orissa, India.
Abstract:
The development of agricultural activities and industrialization recently has various adverse impacts on living organisms. The ever-increasing problem of organic pollution has been an environmental concern to the community. Among these, phenolic pollutants like 2,4-dichlorophenol (2,4-DCP), phenol, 2-chlorophenol (2-CP), and bisphenol-A (BPA) are priority toxic pollutants that are continuously released into environment from many industries. In this work, a biocompatible zinc oxide incorporated polyethylene glycol functionalized reduced graphene oxide composite (RGO-PEG-ZnO) was synthesized and explored for the adsorptive removal of toxic phenolic pollutants from water. The optimized adsorption parameters were solution pH 7, adsorption time 60 min, temperature 25 °C, and dosage 0.25 g/L. The isotherms were well fitted by the Langmuir model for BPA and phenol, whereas for 2-CP, and 2,4-DCP, Freundlich was the best-fitted model, and the maximum uptake of BPA, phenol, 2-CP, and 2,4-DCP were 485.756, 511.248, 531.804, 570.641 mg/g, respectively. The kinetic data for all the phenolic pollutants follow the pseudo-second-order model. The thermodynamic analysis shows that Gibb's free energy (ΔGo) values for all the pollutants were negative, confirming that the process was spontaneous. The positive values of change in enthalpy (ΔHo) 28.261, 37.205, 46.182, and 61.682 kJ/mol for BPA, phenol, 2-CP, and 2,4-DCP, respectively, confirm that the above adsorption process was endothermic. The composite can be used for up to five cycles with a small reduction in the removal percentage. Adsorption performance of the synthesized composite for synthetic industrial effluents shows that up to 86.54% removal occurred in 45 min adsorption time. Based on the remarkably rapid adsorption and high adsorption capacity, RGO-PEG-ZnO composite can be considered an efficient adsorbent for treating phenolic pollutants from wastewater.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
08:57Scalable Syntheses of Graphene Oxide and Reduced Graphene Oxide using Cascade Design Oxidation and Highly Basic Reduction Reactions
Published on: July 3, 2025