Related Experiment Video
Updated: Aug 31, 2025

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Quaternary ammonium salts targeted regulate the surface charge distribution of activated carbon: A study of their
Dingcheng Liang1, Fengqin Yu1, Keping Zhu1
1School of Chemical and Environmental Engineering, China University of Mining and Technology-Beijing, Beijing, 100083, PR China.
Abstract:
Activated carbon (AC) is negatively charged in aqueous solution, which seriously restricts its application range. Quaternary ammonium salt as a common cationic surfactant was utilized to modify the surface charge distribution of materials. The evolution of the surface charge distribution of AC modified by benzalkonium chloride (BAC), diallyl dimethyl ammonium chloride (DDA) and 3-chloro-2-hydroxypropyl tri-methyl ammonium chloride (CTA) was investigated. Results showed that the surface charge of AC modified by CTA does not change significantly. BAC has a high molecular weight, low surface electrostatic potential and large steric hindrance due to its hydrophobic long-chain alkyl. The diffusion of BAC molecules from solution to AC changed its charge distribution. But these molecules were difficult to combine with AC surface, and most of them were adsorbed into the pores of AC to form aggregates, resulting in a significant reduction in the surface area. BAC modified AC could enhance the adsorption capacity of F- in aqueous solution through electrostatic attraction, but the improvement effect was limited due to the reduction of surface area, and the maximum adsorption capacity was only increased from 1.18 to 3.31 mg/g. DDA has a small molecular weight and high surface electrostatic potential and easily binds to the surface of AC. Some CC bonds in DDA combined with the ionized hydrogen ions derived from phenolic hydroxyl groups in AC to form carbonium-ions. Then, they could react with AC to form ether bonds, causing DDA to be closely bonded with the surface of AC. DDA realizes the targeted regulation of the surface charge distribution of AC, it has little effect on the porous structure of AC. The modified AC still maintained strong adsorption capacity, and the maximum adsorption capacity for F- was 54.98 mg/g. Meanwhile, a large number of zeolites were loaded on the modified AC and formed coating structures.
Related Concept Videos
Ion Exchange
EDTA: Chemistry and Properties
Complexometric Titration: Ligands
EDTA: Auxiliary Complexing Reagents
Factors Affecting Solubility
Basicity of Aliphatic Amines
To measure the basicity of amines, two conventions are generally used. The first defines Kb as the basicity constant for the deprotonation reaction of water by the amine, as presented in Figure 1. Conventionally, lower Kb indicates...

