Membrane Fouling and Electrochemical Regeneration at a PbO₂-Reactive Electrochemical Membrane: Study on Experiment...

Membrane fouling and regeneration are the key issues for the application of membrane separation (MS) technology. Reactive electrochemical membranes (REMs) exhibited high, stable permeate flux and the function of chemical-free electrochemical regeneration. This study fabricated a micro-filtration REM characterized by a PbO₂ layer (PbO₂-REM) to investigate the electro-triggered anti-fouling and regeneration progress within REMs. The PbO₂-REM exhibited a three-dimensional porous structure with a few branch-like micro-pores. The PbO₂-REM could alleviate Humic acid (HA) and Bisphenol A (BPA) fouling through electrochemical degradation combined with bubble migration, which achieved the best anti-fouling performance at current density of 4 mA cm^-2 with 99.2% BPA removal. Regeneration in the electro-backwash (e-BW) mode was found as eight times that in the forward wash and full flux recovery was achieved at a current density of 3 mA cm^-2. EIS and simulation study also confirmed complete regeneration by e-BW, which was ascribed to the air-water wash formed by bubble migration and flow. Repeated regeneration tests showed that PbO₂-REM was stable for more than five cycles, indicating its high durability for practical uses. Mechanism analysis assisted by finite element simulation illustrated that the high catalytic PbO₂ layer plays an important role in antifouling and regeneration.