Related Experiment Video
Updated: Aug 30, 2025

The Preparation and Properties of Thermo-reversibly Cross-linked Rubber Via Diels-Alder Chemistry
Published on: August 25, 2016
Durability and Property Study of Decade Old Crumb Rubber Concrete Cored Specimens
Fuqiang Duan1, Han Zhu1, Yasser E Ibrahim2
1School of Civil Engineering, Tianjin University, Tianjin 300350, China.
Abstract:
Crumb rubber concrete (CRC) is a concrete that contains rubber crumbs. This article presents a study of three experiments on long aged CRC specimens that were cored from a decade old CRC bridge deck in Tianjin, China. The three experimental tests conducted were: (1) the flexural stress-strain test on semi-circular disk specimens; (2) the accelerated steel-rebar corrosion test and (3) the carbonation test. In addition, the in situ carbonation test was also carried out on the CRC bridge deck. The flexural stress-strain test results showed that the CRC semi-circular disk specimens exhibited a ductile pattern and high-energy absorbing capacity with its flexural tensile strength being at 5 MPa and the flexural modulus of 10 GPa. The steel corrosion rust rate via the calculation of steel mass loss before and after the test in the accelerated steel-rebar corrosion test remained extremely low. The carbonation test results showed that in comparison with the prediction of two popular carbonation models, the carbonation in the CRC bridge deck took place at a much slower rate during the last 13 years. All of the results obtained in this study are reported for the first-time and indicate that these CRC cored specimens exhibit good mechanical properties and excellent durability characteristics after a decade in service, which may provide the technical knowledge for the possible future application of CRC in concrete constructions.
More Related Videos
07:15A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli
Published on: December 11, 2014
10:00Experimental Protocol to Determine the Chloride Threshold Value for Corrosion in Samples Taken from Reinforced Concrete Structures
Published on: August 31, 2017
Related Concept Videos
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Fatigue Strength of Concrete
Impact Strength of Concrete
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Toughness and Hardness of Aggregate