Related Experiment Video
Updated: Aug 30, 2025

Sandy Soil Improvement through Microbially Induced Calcite Precipitation MICP by Immersion
Published on: September 12, 2019
Experimental Study on PVA-MgO Composite Improvement of Sandy Soil
Zhongyao Li1,2, Zhewei Zhao1,2, Haiping Shi1,2
1Water Conservancy Civil Engineering Department, Tibet Agriculture and Animal Husbandry College, Linzhi 860100, China.
Abstract:
Materials with violent hydration reaction such as cement are used to solidify sandy soil slopes, which will cause destructive damage to the ecology of the slopes. In this paper, polyvinyl alcohol (PVA) and activated magnesium oxide (MgO) are used to improve sandy soil, and the effects of the dosage and curing age of modifiers on the mechanical properties of solidified sandy soil are studied. The dry-wet durability of the composite improved sandy soil is analyzed using a dry-wet cycle test, and the improvement mechanism of PVA and activated magnesium oxide is revealed using an electron microscope. The results show that the curing effect of polyvinyl alcohol and activated magnesium oxide on sand particles is better than that of polyvinyl alcohol alone. The compressive strength of improved soil samples increases with the increase of curing time, and magnesium oxide as an improved material needs appropriate reaction conditions to give full play to its role. The compressive strength of composite improved samples increases first and then decreases during the dry-wet cycle. Through the observation of microstructure, it can be seen that the cementing material wraps and connects the sand particles, and the cementing material of the sample after the dry-wet cycle develops more completely; if the magnesium oxide content is high, cracks may appear inside the sample.
More Related Videos
Related Concept Videos
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Permeability of Concrete
Porosity in Cement Paste
The balance of water to cement in the mix is...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Design Example: Managing Concrete Workability

