Forming Quality Research on the Variable-Diameter Section of the Hollow Axle in Three-Roll Skew Rolling

The hollow axle is the key component of the high-speed train, and the realization of high-quality forming is the key to ensure the safety of train operation. In this paper, the specimen of the variable-diameter section of the hollow axle is taken as the research object, and the generation mechanism of surface spiral mark defects and the formula of spiral mark depth of variable-diameter section in the TRSR (three-roll skew rolling) process with variable roll spacing are explored. The external roundness error and the function C to measure the wall thickness uniformity of the cross-section were taken as the evaluation indexes and the single-factor simulation experiment was established and simulated in the software Simufact.forming16.0 to obtain the influence law of each process parameter on the external roundness error and wall thickness uniformity of the rolled piece. Orthogonal tests were designed and the order and optimal combination of process parameters on the forming quality were obtained by range analysis and ANOVA analysis. The research results provide theoretical guidance for improving the forming quality of the variable-diameter section of the hollow axle in three-roll skew rolling, and promote the transformation of the TRSR process to high performance and accurate forming.