Mechanical and Pore Properties of Concrete Using Basalt-Based Recycled Aggregates According to Mixture Conditions

This study investigated recycled aggregates of Jeju Island-where porous basalt exists as a natural aggregate-and is a study aimed at verifying the applicability of the basalt-based recycled aggregate in the field. To this end, the application properties of concrete were analyzed using the quality improvement of the recycled aggregate (PRA), the type of fine aggregate received in the region, and the cement content as variables. In an experiment using concrete in which 50% of the PRA was replaced with basalt (BA), the air content of the fresh concrete decreased due to the increasing solid content of the aggregate when PRA and fine aggregates (with an even particle size distribution) were used. Regarding the properties of the hardened concrete, when the PRA and fine aggregate (with a high fineness modulus) were used, the compressive strength was 33.6 MPa and the modulus of elasticity was 23.1 GPa, which are higher than those of the BA specimen. The resistance to carbonation increased due to the improved quality of the PRA specimen. Pores that are 0.3 mm in size or larger decreased when the PRA and fine aggregates of even particle sizes were used. This form of pore reduction was found to have a direct correlation with the improvement of mechanical properties.