Related Experiment Video
Updated: Aug 30, 2025

Performing In Situ Closed-Cell Gas Reactions in the Transmission Electron Microscope
Published on: July 24, 2021
Boosting Electrical Response toward Trace Volatile Organic Compounds Molecules via Pulsed Temperature Modulation of
Tiantian Dai1, Zhi Yan2,3, Meng Li1
1Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, 230031, P. R. China.
Abstract:
Insufficient limit of detection (LoD) toward volatile organic compounds (VOCs) hinders the promising applications of metal oxide chemiresistors in emerging air quality monitoring and/or breath analysis. There is an inherent limitation of widely adopted strategies of creating sensitive chemiresistors then operating at the optimized temperature via a continuous heating (CH) mode. Herein, a strategy combining Pt single atoms anchoring (chemical sensitization) with pulsed temperature modulation (PTM, physical sensitization) is proposed. Apart from generating abundant surface asymmetric oxygen vacancy (Pt-VO -W) active sites at pulsed high temperature (HT) stage, inward diffusion of trace target VOCs across the sensing layer at pulsed low temperature stage (driven by PTM induced concentration gradient), can greatly enhance the charge interaction probability between the generated surface active species and the surrounding VOCs, and thus offers a novel avenue on addressing the bottleneck issue of low LoD by PTM. Triggered by HT of 300 °C, the responses of Pt anchored WO3 chemiresistor to 1 ppm trimethylamine (TMA) and xylene can be drastically boosted from 1.9 (CH) to 6541.5 (PTM) and 1.5 (CH) to 1001.1 (PTM), respectively. And ultra-low theoretic LoD of 0.78 ppt (TMA) and 0.18 ppt (xylene) are successfully achieved, respectively.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...

