Related Experiment Video
Updated: Aug 30, 2025

Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Investigation of aqueous phase dynamics in a uranium stripping unit using radioactive tracer
Sunil Goswami1, Subhankar Manna2, Santosh K Suman3
1Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Mumbai, 400085, India.
Abstract:
Mixer-setters units are widely used in uranium purification processes. For efficient operations of mixer-settler units, it is essential to measure the hydrodynamics parameters of the different phases involved. The residence time distribution (RTD) measurement is commonly used method to estimate the hydrodynamics parameters of process reactors. In the present study, RTD of the aqueous phase was measured in different stages mixer-settler unit (mixers, settlers and mixer-settler units) used for stripping operation using Iodine-131 as a radiotracer. For the RTD measurements, radiotracer was injected as an impulse in aqueous phase feed line and its movement was monitored at different locations in the stripping unit using NaI(Tl) detectors. The mean residence times (MRTs) of the aqueous phase were estimated from measured RTD curves. For quantification of the degree of mixing, suitable flow models were proposed based on design and nature of the measured RTD curves and subsequently used for simulation. Based on the results of the RTD study, the mixing of aqueous phase was characterized and design of the stripping unit and its sub-units were validated. The optimum conditions were identified for efficient for the operation of the stripping unit.

