Related Experiment Video
Updated: Aug 30, 2025

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
Fish habitat restoration on the basis of water morphology simulation
Xiaolong Chen1, Xuan Che1, Xingguo Liu1
1Fishery Machinery and Instrument Research Institute, Chinese Academy of Fishery Sciences, Shanghai, China.
Abstract:
The hydrodynamic conditions of rivers affect fish habitats by influencing parameters such as river bottom topography. Ecological restoration projects change the water morphological characteristics of rivers. Here, water flow characteristics of the upper Yangtze River before and after the construction of a restoration project were analyzed using the computational fluid dynamics simulation method. The longitudinal diversion dam could divide the river into two flow velocity zones, and the outer flow is similar to the original river with a flow velocity of 0.75 m/s. However, flow velocity on the inner side of the river was about 0.25 m/s, forming a larger buffer area. The eddy became more diversified and stable, with a high eddy viscosity coefficient and less fluctuations, at 9 Pa·s; this was conducive to fish aggregation and spawning. At different depths, large gradient differences were observed between the inner and outer sides of the longitudinal diversion dam, and the turbulent current and upward flow of the inner side were obvious; this was more favorable to the aggregation of different fish species. The longitudinal dam body was under a pressure of about 200.2 Pa at the same flow rate; this was significantly lower than the pressure on the transverse dam body. The field flow test and fish survey data showed that the error rate of the simulation using the RNG turbulent model was less than 10% compared with actual mapping. After the restoration of fish habitats by the longitudinal diversion dam, the number of fish species in the area increased from 40 to 49; The density of fish in the water increased from 71.40 fish per 1,000 m2 before the project to 315.70 fish per 1,000 m2 after the project. These results can provide a reference for the rapid assessment of water morphology and fish habitat restoration in the future.
Related Concept Videos
Typical Model Studies
Modeling and Similitude
Design Example: Creating a Hydraulic Model of a Dam Spillway
Rapidly Varying Flow
Design Example: Design of an Irrigation Channel
Design Example: Analyzing Capacity Contours for Flood Risk Assessment

