Related Experiment Video
Updated: Aug 30, 2025

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
A Review of Recent Evidence for Utilizing Ultraviolet Irradiation Technology to Disinfect Both Indoor Air and
1National Institutes of Health, Bethesda, Maryland, USA.
Abstract:
Background: The implementation of "no-touch" technologies such as ultraviolet (UV)-based sanitizers to effectively disinfect the air and high-touch surfaces may be important to keeping working environments and indoor public gathering places, where there may be a higher risk of infection from specific agents, safe for all occupants, particularly with the emergence of highly communicable diseases. UV technologies have been used for many years and are being revisited as one of disinfecting technology to address the SARS-CoV-2 virus that causes COVID-19. Methods: We selected over 20 relevant source documents from approximately 80 papers dating between 1985 and the present (2020) to evaluate the applicability, safety and relative contribution of ultraviolet to disinfect air and surfaces in the built environment. UV-based sanitizers have the potential for effective application when used in conjunction with other disinfecting means. Results: The efficacy of UV-based sanitizer technologies are promising but are dependent on numerous environmental, physical and technical factors. Conclusions: We believe that UV technologies should not be utilized in isolation and should be considered as an adjunct to protocol-driven standard operating procedures for cleaning and disinfection, had hygiene practices, and appropriate use of personal protective equipment (PPE).
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Chemical Agents for Microbial Control
Mutations
Chromosomal Alterations Are Large-Scale Mutations
While point mutations are changes in a single nucleotide in...

