Micellar and sub-micellar chromatography with a cocamidopropyl betaine surfactant

We have coated a typical C18 column with the pH cationic charge controllable zwitterionic synthetic surfactant, cocamidopropyl betaine (CAPB), in order to generate a mixed mode reversed phase weak ion exchange column. As determined by the Thomas model, the column has an adsorbed surfactant capacity of 0.557 mmoles. The addition of 8.8 × 10^-4 M CAPB to the totally aqueous mobile phase ensured stability of the surfactant on the column and permitted separation of the four component sulfonamide mixture with micellar liquid chromatography (MLC) in under 11 min. Comparatively, with a dilute H₂SO₄ mobile phase with no CAPB, the separation time for the sulfonamide mixture reached an excessive run time of an hour on the bare C18 chains. With CAPB in the mobile phase (no organic solvent present), a seven component sulfonamide mixture could be separated in less than 45 min. A five component short chain carboxylic acid mixture, separated in 20 min, was used to examine the ion exchange character of the column in pH environments of 2.3 and 4.6. Three phase MLC equilibrium analysis was also done in these pH environments with the sulfa drug and carboxylic acid mixtures to determine partition coefficients. Finally, a quite high molecular weight (70,000) anionic polystyrene sulfonate polymer was characterized by MLC with only CAPB and variable pH mobile phases; the optimal pH was determined to be 5.6. A totally aqueous mobile phase without CAPB was not suitable for profiling this polymer.