Nitrogen removal performance and rapid start-up of anammox process in an electrolytic sequencing batch reactor (ESBR)

In this study, the electrolytic sequencing batch reactor (ESBR) with different current densities was constructed to investigate the nitrogen removal performance and rapid start-up of anaerobic ammonia oxidation (anammox) process. The changes of total nitrogen removal rate (TNRR), specific anammox activity (SAA) and nitrogen concentration under different current densities were analyzed, and then the effect of the optimal current density on the start-up of anammox in ESBR was explored. The results showed that ammonium nitrogen removal efficiency (92.7%), nitrite nitrogen removal efficiency (15.5%) and total nitrogen removal efficiency (28.1%) were obtained with the TNRR and SAA were 0.0118 g N L^-1 d^-1 and 0.0050 g N (g Vss d)^-1, respectively under the optimal conditions (i.e., current density = 0.10 mA cm^-2, temperature = 36 °C and pH = 7.6). In addition, the stoichiometric ratio indicated that anammox was initiated successfully for 91 days in ESBR with the current density of 0.10 mA cm^-2, which was shortened by 10 days compared with the conventional SBR without current density. These results suggest that an array of rapid start-up processes of anammox can be developed through applying current density to stimulate the activity of anammox bacteria (AnAOB).