Rapid MR Scanner Independent B1 Field Measurement System for Phased Arrays

This paper demonstrates a rapid B1 field benchtop measurement system that is independent of an MR scanner and network analyzer. This system can be used to obtain radiofrequency (B1 field) strength distribution plots of multiple 2D slices (with an extension to 3D) of a liquid cylindrical phantom for multi-element phased arrays used in MRI. The system can be used in three modes- element, phased array, and multiple fixed point pattern measurement. These modes are demonstrated for a 7T 1H eight-channel dipole array and a corn-syrup based phantom. The system can measure complex phase and amplitude measurements from up to 8 elements in the first mode one or 8 different phase settings in the second mode at a rate of approximately 37 positions per minute, allowing a full 2D B1 mapping for 1303 points in 33.05 minutes. The scan patterns obtained using this setup are compared to the ones obtained using an HP network analyzer and simulations. This work can be extended to measure the E field, SAR and upon increasing the speed of measurement, could be used for applications such as Transmit SENSE. Clinical Relevance- This work benefits a faster and more widely accessible measurement system for phased array antennas for MRI. As phased arrays are becoming very important in MRI, the ability to assess individual element performance more rapidly and B1 shimming performance is important to aid in their further development.