A fully handwritten-on-paper copper nanoparticle ink-based electroanalytical sweat glucose biosensor fabricated using...

This article reports a facile fabrication of a highly sensitive enzyme-free sweat glucose sensor over Whatman filter paper substrate employing a dual-step pencil and pen approach. Initially, two pencil-drawn electrodes (PDEs) are obtained on the filter paper through the manual abrasion of an 8B graphite pencil. Then, the sensing layer is drawn over one of the PDEs using a custom-made copper (Cu) nanoparticle ink (CuNP-ink) pen to form copper nanoparticle ink decorated PDE (CuNP-ink/PDE) which serves as a working electrode, while the other PDE is drawn with silver conductive ink (Ag-ink) pen to form reference electrode. The developed CuNP-ink/PDE is composed of 43.5% of metallic Cu nanoparticles, inducing a highly crystalline and conductive nature, thus promoting fast electron transfer during glucose electrooxidation. The developed sensor offers a sensitivity of 2691.7 μAmM^-1cm^-2, a detection limit of 0.5 μM, a linear range of 1.2-40 μM, and a fast response time of ∼ 1.5 s. Besides, the sensor measurements are stable, reproducible, and selective in glucose sensing. Also, the reliability of the sensor is tested by comparing its performance with a UV-Visible spectrophotometer for proving its efficacy in sweat glucose detection. Experimental results evince the effectiveness of the designed sensor for glucose detection in human sweat.